Steps for use:
1. Power On
Connect the USB and Power Adaptor into a power supply. Zaria will then turn On.
*Note Zaria does not turn off unless disconnected from a power supply.
2. Set the Clock
When Zaria is plugged in for the first time (or after a restart/power failure) the Clock Display will flash.
Set the time using the Timer + and - button on the front face.
Press the Time Set touch button ( ) to confirm the time.
Once the time is set you can set the display to either 12 hour or 24 hour time using the Time Set touch button.( ) AM or PM will then be displayed (In 12 hour mode).
3. Brightness for Time Display
The auto setting for the LED Clock Display is set at the brightest level.
To change the intensity of the light, press the Brightness Display button ( ).
Once set, if you edit any settings on the Diffuser it will revert to the original setting temporarily,
after 5 seconds it will then revert back to your programmed light setting.
4. LED Light Button
Press LED light button once: The light will turn on.
Use the +/- buttons to set brightness levels, 1-10 (dull to bright).
Press twice: To select your desired light colour by using + and – buttons.
You can choose between Green, Red, Blue, Pink, Orange and Aqua and natural.
Press a third time: To turn the light Off.
5. Setting the Alarm Clock & Alarm sounds
To set the alarm time, hold the Alarm symbol button for 3 seconds.
The clock will begin to flash on the current setting.
Using the + and – buttons set the alarm time required.
Once the desired time is selected press the Alarm symbol button to confirm and set the time.
Once programmed for use, the Alarm symbol will appear above the clock numbers.
6. Alarm Music/Sound
Press the Music symbol button to select between 1 to 6 pre-set Alarm tunes or the FM Radio (7th press).
Use the +/- buttons to select options 1-7. Each tune will play for 60 seconds when selected, once chosen press the Music symbol again to set the selection.
To snooze the Alarm, simply press (Snooze Button).
To turn Alarm Off completely press any button.
7. Setting FM Radio & stations
Press the FM button once, hold it down for 3 seconds and let the device scan for a few minutes.
All the stations will automatically save as you scan through the available stations
(you can see P01, P02, P03 etc... these will become the saved stations).
There is no maximum / minimum amount of stations that can be saved as the device will scan the stations that are available, so it depends of the frequency of the area/region.
Once the complete scan has been done and the available stations have been saved, you can choose the station of your choice by using and buttons (P01,P02, etc..)
Press the (minus) or (plus) volume buttons to adjust radio sound up or down.
8. Essential Oil Diffuser
To prepare the Diffuser for use, place 3-4 drops of your selected dusk Essential Oil onto one side of the mesh fragrance disc and then place the disc into the compartment (oiled side facing up).
Do not add essential oils onto the disc whilst it is in the diffuser.
*5 discs are provided with the Diffuser and they will also be available as a spare part.
To begin diffusion close the compartment then push the Diffuser Symbol button ( ).
Zaria should only be used with dusk Essential Oils (not MoodMist Oils).
Re-apply your fragrance on preference. Renew the pad when you want to change the fragrance or after a few weeks.
The Diffuser operates by a fan method. To turn off the Diffuser simply press the Diffuser symbol button again.
Steps for use:
9. Sunrise Simulation
Sunrise Simulation creates the perfect atmosphere to wake up slowly, with gentle light & soothing fragrance.
This mode will automatically start 30 minutes before the alarm clock time.
During the sunrise simulation mode, the light and aroma fragrance will be ON, and the light will gradually increase in brightness.
At the alarm time, the wake up sound or radio will play for 5 minutes.
While the alarm sound is playing you may:
1. Snooze the alarm by pressing the snooze button. This will stop the light and sound for 5 minutes. The aroma fragrance will still be ON.
2. Press any buttons except the snooze button to stop the sound, light and aroma fragrance.
3. Press the LED light button to switch off the light.
10. Sunset Simulation
The Sunset Simulation creates an atmosphere of a slow, relaxing lull to sleep.
Slow light fades gradually from bright to dim to Off.
There are 3 timer settings - 15, 30 or 60 minutes.
Press timer button once: The default timer is 15 minutes.
Press button twice: Timer will be set to for 30 minutes.
Press a third time: Timer will be set for 60 minutes.
The setting will be confirmed by holding down the sunset setting
button for 5 seconds.
Cleaning and Maintenance
Essential Oil residue can build up in the Fragrance Disc Compartment.
To clean:
1, Turn off the diffuser and unplug Zaria from the power source.
2. Remove the Fragrant Disc.
3. Wipe the compartment with a clean, soft cloth to remove any Essential Oil residue that may line the compartment.
* Never immerse the Diffuser in water. Only spot clean or dust down using a soft, dry cloth.
